Do not attempt to wind, loosen or remove a torsion spring on your own. The stored force can throw a winding bar with real violence. Call the number on this page to be connected with a local garage door company in Seabrook.

Rust you can see from the floor
Look at the coil above the door. Orange scale along the wire, or a dull, pitted surface, means moisture has been at it. Around Seabrook damp air makes that common, and corroded wire usually breaks without much notice.
Wire size and length
The thickness of the wire and the length of the coil together set how much the spring can lift, and how many cycles it can take. Two springs that look alike on the shelf can behave very differently, which is why technicians measure the old set instead of guessing from a photograph or a label.
Bay-side garages hold humid, salty air, which attacks bearings, cones and shafts as well as the coils, so a thorough swap includes lubrication of the whole shaft.
Taller doors on boat or RV garages near the water often need heavier, longer springs, so give the company the exact door height and width.
Bundled work
While the shaft is exposed, a company may offer to replace worn bearings, end caps or cables. Those add to the bill but usually cost less when done together than in separate visits, because the shaft is already exposed. Ask which items are urgent and which can wait, and ask for the answer in writing.
What to ask before they start
Ask which springs are going in, what cycle rating they carry, whether both are replaced, whether bearings and cable drums are inspected and whether the door will be balance-tested. A company that answers openly is usually a good sign. Write the details down for later.
Before work starts in Seabrook
Every residential opener sold under the federal entrapment rule has to auto-reverse on contact and pair with a backup device, usually photo eyes near the floor. If yours ignores an obstruction, unplug it and leave the door closed.
Planning a new door? If an HOA covers your street, its architectural review may need to sign off on style and color first; repairs that keep the same look usually don't.
City of Seabrook permit office handles building permits for Seabrook addresses; a like-for-like door swap often needs nothing, while framing changes may.
No power, no opener. Your electric bill lists the outage number, and the red release cord lets you lift the door manually, as long as the springs aren't broken.
Companies that take calls here usually also work in La Porte, Kemah and Webster.
Treat bottom brackets with respect
The brackets at the bottom corners of the door are connected to cables that stay under tension. Loosening them can release a violent snap. Leave every fastener in place and let the company deal with them.
Torsion Spring Replacement questions in Seabrook
Can I replace a torsion spring myself?
What is a high-cycle spring?
Why did my springs not last?
Does calling commit me to hiring anyone?
More garage door services in Seabrook
Torsion Spring Replacement nearby
Helpful guides
Sources
Last updated: