Torsion springs are the most common lift system on Houston steel sectional doors, and a failed one stops the door cold. Replacement means matching new springs to the door's weight and size. Call the number on this page to be connected with a local garage door company in Houston.

How torsion springs work
A torsion spring is a tightly wound coil mounted on a steel shaft above the door opening. As the door closes, the coil is wound further, storing energy. As the door opens, that energy unwinds and does most of the lifting. Correct sizing matters. A spring too weak leaves the door heavy, and one too strong can make it fly upward. Each spring is rated for a set number of open-and-close cycles, and in a busy household that limit can arrive sooner than you think.
Signs it is time
- The door will not rise more than a few inches, or does not rise at all.
- You can see a split in the coil above the door.
- The door slams down or drifts when stopped partway.
- The opener runs, but the door barely responds.
Safety comes first
DASMA says spring systems are dangerous and should be repaired only by trained professionals. Winding bars, set screws and high tension are the reason. No owner steps are listed here for that reason. If you suspect a break, keep the door closed, leave the opener off and keep people and cars out of the way. If you use the manual release, do it only with the door closed and only if you are sure the springs are intact.
What the call looks like
Cost ranges
National figures from HomeGuide list one torsion spring at $140 - $270 and two springs at $200 - $350. A Houston cost guide lists broken spring repair generally at $150 - $350. Heavier doors and higher-cycle springs can cost more, so ask for the parts listed in writing.
Houston conditions
Hot, humid summers and coastal air promote rust on coils, which can shorten spring life. Long hurricane-season outages also mean more hand operation of doors, and the NWS Houston/Galveston guide warns of outages lasting days to weeks after a major storm. Each manual cycle adds wear, so a spring that is already tired may let go during that stretch.
Permits and approvals
Replacing springs on an existing door is repair work. Still, ask your city's building office whether any rule applies; unincorporated areas deal with the county. HOA rules rarely touch spring work, though a color or style change would.
Torsion Spring Replacement questions from Houston homeowners
How can I tell I have torsion springs?
How long do torsion springs last?
Can I replace a torsion spring myself?
What do torsion springs cost?
Related garage door services in Houston
Helpful guides
Torsion Spring Replacement in nearby cities and towns
Harris County
Fort Bend County
Montgomery County
Brazoria County
Galveston County
Sources
Last updated: